NA1002EU

Non-Asbestos Jointing Sheet with Aramid Fibers and NBR Rubber

Desciption and Applications

TEADIT style NA1002 is a compressed non-asbestos jointing- sheet material produced from Aramid fibres, bonded with Nitrile rubber (NBR). It is being manufactured by means of a hot calender process under rigorous quality control standards which are registered under ISO 9001 certification.Style NA1002 is indicated for sealing petroleum derivatives, water, saturated steam, gases and chemical products in general. Exceptional performance in connection with gas.

Approvals

TA-Luft
DVGW
Germanischer Lloyd
ABS Fire Safe
KTW

WRAS
Blow-Out-Test VDI 2200
BAM
ABS Certificate

Service Limits

Temperature (ºC)	Continuous Service: 260
	Maximum Service: 400
Pressure (bar)	Continuous Service: 80
	Maximum Service: 110

Availability (in mm)	1.500 x 1.600
Availability (in mm)	1.500 x 3.200
Thickness (in mm)	1.0/1.5/2.0/2.5 and 3.0
Color	Green

Typical Physical Properties:
Density	app. 1,95 g/cm3
Compressibility - F36	10%
Recovery - ASTM F36	60%
Tensile Strength, Transverse - F152	13 N/mm2
Thickness Increase - ASTM F146 - after 5hr
ASTM Oil Nr.3 @ 150ºC	8%
Fuel B, @ +21-29ºC	7%
Weight Increase - ASTM F146 - after 5hr
ASTM Oil Nr.3 @ 150ºC	11%
Fuel B, @ 21-29ºC	9%

Related Products

TEADIT NA1005 Non-Asbestos Gasket Sheet, NA Jointing Sheet NA-1005

TEADIT NA1005 Non-Asbestos Sheet Gasketing
TEADIT NA-1005 Non-Asbestos Joingin Sheet
TEADIT NA1005 Non-Asbestos Gaskets

TEADIT NA1100 Non Asbestos Gasket Sheet Non asbestos Jointing Sheet

TEADIT NA1100 Non Asbestos Gasket Sheet
TEADIT NA-1100 Non Asbestos Gasket
TEADIT NA1100 Non Asbestos Jointing Sheet
NA1100 Compressed Sheet with Carbon Fibers /NBR Binder.